Idea
In short
How do you build a negative voltage generator?
An ICL7660 turns a +5 V supply into -5 V for op-amp projects. You need ICL7660 voltage inverter, Electrolytic capacitor 10 µF × 2, LED 5 mm red, Resistor 330 Ω, Breadboard 830 Tie Points, 9 V battery and 9 V battery snap with DC jack.
- Level
- Intermediate
- Time
- About 90 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make a negative rail from a single supply.
Parts list
- Integrated Circuits
- Passives
- Semiconductors
- Passives
- Prototyping
- Batteries
- Power
How to build it
- Wire the charge pump
- Load it with a resistor
- Measure the output
- See how it droops with current
- Power an op-amp with a split supply
Common questions
What parts do I need for the negative voltage generator?
ICL7660 voltage inverter, Electrolytic capacitor 10 µF × 2, LED 5 mm red, Resistor 330 Ω, Breadboard 830 Tie Points, 9 V battery and 9 V battery snap with DC jack.
How long does the negative voltage generator take to build?
About 90 minutes for a intermediate maker.
