Idea
In short
How do you build a helmet audio for navigation?
A Bluetooth receiver and thin speakers inside a helmet play phone navigation prompts. You need Bluetooth audio receiver module (BT5.0), PAM8403 stereo amplifier module, Speaker 8 Ω 0.5 W × 2, Li-Po battery 3.7 V 1000 mAh and TP4056 module with protection (USB-C).
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Package audio electronics for a helmet.
Parts list
- Audio
- Audio
- Motors & Actuators
- Batteries
- Power
How to build it
- Mount thin speakers by the ears
- Power from a small Li-po
- Charge over USB
- Keep volume low so you hear traffic
- Check your local helmet rules
Common questions
What parts do I need for the helmet audio for navigation?
Bluetooth audio receiver module (BT5.0), PAM8403 stereo amplifier module, Speaker 8 Ω 0.5 W × 2, Li-Po battery 3.7 V 1000 mAh and TP4056 module with protection (USB-C).
How long does the helmet audio for navigation take to build?
About 120 minutes for a intermediate maker.
