Turbidity sensor module
Measures how cloudy water is with light.
MeasuresTurbidity (relative)
InterfaceAnalog plus digital
Supply voltage5 V
SensorsReviewedMPN Turbidity sensorUsed in 3 projects
In short
What is the Turbidity sensor module and what is it used for?
Measures how cloudy water is with light. Makers use it for water quality projects.
How it works
An IR LED shines across a gap and a phototransistor measures how much light gets through the water.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Turbidity (relative) |
| Interface | Analog plus digital |
| Supply voltage | 5 V |
Pinout
V5 V
GGround
AAnalog output
DDigital threshold output (selected on the module)
How to use it
The probe is not waterproof above the line on its body. Clear water gives about 4.1 to 4.2 V; cloudier water gives lower values. Calibrate against your own clean water, as the curve from the seller is approximate.
Applications
Water quality projects
Builds that use it
Alternatives
- TDS sensor moduleMeasures dissolved salts rather than cloudiness
Common questions
What is the Turbidity sensor module used for?
In maker projects: water quality projects.
How does the Turbidity sensor module work?
An IR LED shines across a gap and a phototransistor measures how much light gets through the water.
What voltage does the Turbidity sensor module need?
5 V.
How do I connect the Turbidity sensor module to an Arduino or ESP32?
Analog plus digital. Pins: V (5 V), G (Ground), A (Analog output), D (Digital threshold output (selected on the module)).
What can I use instead of the Turbidity sensor module?
TDS sensor module.
