Heltec WiFi LoRa 32 V3
ESP32-S3 board with an SX1262 LoRa radio and a small OLED.
MicrocontrollerESP32-S3 240 MHz
Flash8 MB
WirelessWi-Fi, Bluetooth 5 LE, LoRa SX1262 (865 to 867 MHz in India)
Development BoardsReviewedMPN WiFi LoRa 32 V3Used in 11 projects
In short
What is the Heltec WiFi LoRa 32 V3 and what is it used for?
ESP32-S3 board with an SX1262 LoRa radio and a small OLED. Makers use it for loRa sensor nodes, Meshtastic.
How it works
An ESP32-S3 with an SX1262 LoRa radio, a 0.96 inch OLED and a LiPo charger.
Key specifications
| Development board spec | Value |
|---|---|
| Microcontroller | ESP32-S3 240 MHz |
| Flash | 8 MB |
| Wireless | Wi-Fi, Bluetooth 5 LE, LoRa SX1262 (865 to 867 MHz in India) |
Pinout
GPIO8 9 10 11LoRa NSS SCK MOSI MISO
GPIO12 13 14LoRa RST BUSY DIO1
GPIO17 18 21OLED SDA SCL RST
GPIO36Vext power control for the OLED
GPIO35LED
JSTLiPo battery
How to use it
Always fit the antenna before transmitting. Use the IN865 band (865 to 867 MHz) in India with RadioLib or the Heltec library, or flash Meshtastic. Pull Vext low to power the OLED.
Applications
LoRa sensor nodesMeshtastic
Builds that use it
Idea
Water quality buoy
Idea
Municipal smart bin network
Idea
Flood warning network
Idea
LoRa farm sensor network
Idea
Offline LoRa text messenger
Idea
Build and test a dipole antenna
Idea
LoRa to SMS gateway
Idea
Solar LoRa weather node
Showing 8 of 11
Alternatives
- LilyGO T-BeamAdds GPS and an 18650 holder
- ESP32 DevKit V1Add your own LoRa module
Common questions
What is the Heltec WiFi LoRa 32 V3 used for?
In maker projects: loRa sensor nodes, Meshtastic.
How does the Heltec WiFi LoRa 32 V3 work?
An ESP32-S3 with an SX1262 LoRa radio, a 0.96 inch OLED and a LiPo charger.
What can I use instead of the Heltec WiFi LoRa 32 V3?
LilyGO T-Beam and ESP32 DevKit V1.
