Idea
In short
How do you build a vitals kiosk?
A kiosk reads temperature, pulse and weight and shows the results for a school health day. You need ESP32 DevKit V1, MLX90614 infrared thermometer, MAX30102 pulse oximeter and heart rate sensor, Weight sensor 50 kg half-bridge (bathroom scale), HX711 load cell amplifier and 2.8 inch TFT touch (ILI9341, SPI).
- Level
- Advanced
- Time
- About 480 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Combine several measurements.
Parts list
- Development Boards
- Sensors
- Sensors
- Sensors
- Sensors
- Displays
How to build it
- Measure each vital
- Show results
- Save with a student ID
- Print a slip
- State clearly it is not a diagnosis
Common questions
What parts do I need for the vitals kiosk?
ESP32 DevKit V1, MLX90614 infrared thermometer, MAX30102 pulse oximeter and heart rate sensor, Weight sensor 50 kg half-bridge (bathroom scale), HX711 load cell amplifier and 2.8 inch TFT touch (ILI9341, SPI).
How long does the vitals kiosk take to build?
About 480 minutes for a advanced maker.
