Components / Displays / 2.8 inch TFT touch (ILI9341, SPI)

2.8 inch TFT touch (ILI9341, SPI)

Larger ILI9341 SPI screen with a touch controller.

TypeColour TFT with resistive touch
Size2.8 inch
Resolution240 × 320
Driver ICILI9341 + XPT2046 touch
DisplaysReviewedMPN ILI9341 2.8 touchUsed in 9 projects
23.4°CILI9341
In short

What is the 2.8 inch TFT touch (ILI9341, SPI) and what is it used for?

Larger ILI9341 SPI screen with a touch controller. Makers use it for ESP32 touch panels.

How it works

An ILI9341 drives the 240 × 320 TFT while an XPT2046 reads the resistive touch layer.

Key specifications

Display specValue
TypeColour TFT with resistive touch
Size2.8 inch
Resolution240 × 320
Driver ICILI9341 + XPT2046 touch
InterfaceSPI
Supply voltage3.3 V logic

Pinout

VCC5 V or 3.3 V (J1 jumper)
GNDGround
CSTFT chip select
RESETReset
DCData or command
SDI (MOSI) SCKSPI
LEDBacklight
SDO (MISO)SPI read
T_CLK T_CS T_DIN T_DO T_IRQXPT2046 touch

How to use it

Use TFT_eSPI or Adafruit_ILI9341 with XPT2046_Touchscreen. Display and touch can share the SPI bus with separate CS pins. Logic is 3.3 V.

Applications

Alternatives

Buy at

Common questions

What is the 2.8 inch TFT touch (ILI9341, SPI) used for?

In maker projects: ESP32 touch panels.

How does the 2.8 inch TFT touch (ILI9341, SPI) work?

An ILI9341 drives the 240 × 320 TFT while an XPT2046 reads the resistive touch layer.

What voltage does the 2.8 inch TFT touch (ILI9341, SPI) need?

3.3 V logic.

How do I connect the 2.8 inch TFT touch (ILI9341, SPI) to an Arduino or ESP32?

SPI. Pins: VCC (5 V or 3.3 V (J1 jumper)), GND (Ground), CS (TFT chip select), RESET (Reset), DC (Data or command), SDI (MOSI) SCK (SPI).

What can I use instead of the 2.8 inch TFT touch (ILI9341, SPI)?

ILI9341 TFT Module and ESP32 2.8 inch display board (CYD, ESP32-2432S028).