Weight sensor 50 kg half-bridge (bathroom scale)
Half-bridge load cells; use four with an HX711 for a body scale.
MeasuresForce
Range0 to 50 kg each
Interface3-wire half bridge
SensorsReviewedMPN Load cell 50kg half bridgeUsed in 5 projects
In short
What is the Weight sensor 50 kg half-bridge (bathroom scale) and what is it used for?
Half-bridge load cells; use four with an HX711 for a body scale. Makers use it for bathroom scales.
How it works
Strain gauges on a small metal piece, wired as a half Wheatstone bridge.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Force |
| Range | 0 to 50 kg each |
| Interface | 3-wire half bridge |
Pinout
RedCentre tap of the half bridge (signal)
Black and WhiteEnds of the half bridge (check with a meter)
How to use it
Use four of them in a full bridge, or two with two resistors, connected to an HX711. Measure resistances to identify the wires: the two outer wires show the full value, the centre wire half.
Applications
Bathroom scales
Builds that use it
Alternatives
- Load cell 20 kgSingle 4-wire load cell
Common questions
What is the Weight sensor 50 kg half-bridge (bathroom scale) used for?
In maker projects: bathroom scales.
How does the Weight sensor 50 kg half-bridge (bathroom scale) work?
Strain gauges on a small metal piece, wired as a half Wheatstone bridge.
How do I connect the Weight sensor 50 kg half-bridge (bathroom scale) to an Arduino or ESP32?
3-wire half bridge. Pins: Red (Centre tap of the half bridge (signal)), Black and White (Ends of the half bridge (check with a meter)).
What can I use instead of the Weight sensor 50 kg half-bridge (bathroom scale)?
Load cell 20 kg.
