Projects / Ideas / Candle flame detector demo

Candle flame detector demo

BeginnerSafetyIdeaReviewed
In short

How do you build a candle flame detector demo?

An infrared flame sensor notices a candle at arm's length and beeps. A learning demo only, never a replacement for a fire alarm. You need Arduino Nano, Flame sensor module (IR), Active buzzer 5 V, LED 5 mm red, Resistor 220 Ω and Breadboard 830 Tie Points.

Level
Beginner
Time
About 150 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

See how a flame sensor responds.

Parts list

How to build it

  1. Wire the sensor
  2. Read the analog value
  3. Set a threshold
  4. Beep and light the LED
  5. Test only with a safe small candle supervised by an adult

Related projects

Common questions

What parts do I need for the candle flame detector demo?

Arduino Nano, Flame sensor module (IR), Active buzzer 5 V, LED 5 mm red, Resistor 220 Ω and Breadboard 830 Tie Points.

How long does the candle flame detector demo take to build?

About 150 minutes for a beginner maker.