Idea
In short
How do you build a smoke indicator for learning?
A gas sensor warms up and raises an indicator when the reading rises. A learning demo only, never a replacement for a certified smoke alarm. You need Arduino Nano, MQ-2 gas and smoke sensor module, LED 5 mm red, Active buzzer 5 V, Resistor 220 Ω and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Learn how gas sensors respond.
Parts list
- Development Boards
- Sensors
- Semiconductors
- Motors & Actuators
- Passives
- Prototyping
How to build it
- Let the sensor warm up
- Read a baseline
- Set a threshold above it
- Light the LED and beep
- Reset after clean air
Common questions
What parts do I need for the smoke indicator for learning?
Arduino Nano, MQ-2 gas and smoke sensor module, LED 5 mm red, Active buzzer 5 V, Resistor 220 Ω and Breadboard 830 Tie Points.
How long does the smoke indicator for learning take to build?
About 210 minutes for a intermediate maker.
