Idea
In short
How do you build a slow wheel car on continuous servos?
Two continuous-rotation servos turn wheels at a controlled speed, with a trim step to make the car drive straight. You need Arduino Uno R3, Continuous rotation servo (SG90 360°) × 2, 9 V battery, 9 V battery snap with DC jack, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Drive with continuous servos.
Parts list
- Development Boards
- Motors & Actuators
- Batteries
- Power
- Switches
- Prototyping
How to build it
- Find the stop value for each servo
- Trim until it stands still
- Drive forward
- Turn on the spot
- Tune it to drive straight
Common questions
What parts do I need for the slow wheel car on continuous servos?
Arduino Uno R3, Continuous rotation servo (SG90 360°) × 2, 9 V battery, 9 V battery snap with DC jack, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the slow wheel car on continuous servos take to build?
About 150 minutes for a beginner maker.
