Projects / Ideas / Mecanum wheel motion lab

Mecanum wheel motion lab

IntermediateRoboticsIdeaReviewed
In short

How do you build a mecanum wheel motion lab?

A four-wheel base with mecanum wheels drives sideways and diagonally, and a table shows which motor spins which way for each move. You need Arduino Uno R3, Mecanum wheel set (60 mm, 4 pcs), Motor driver shield L298P for Uno, BO motor straight 100 RPM × 4, 9 V battery and 9 V battery snap with DC jack.

Level
Intermediate
Time
About 240 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

See how mecanum wheels move.

Parts list

How to build it

  1. Fit the wheels in the right pattern
  2. Wire four motors
  3. Run forward
  4. Run sideways
  5. Fill in the motor table

Related projects

Common questions

What parts do I need for the mecanum wheel motion lab?

Arduino Uno R3, Mecanum wheel set (60 mm, 4 pcs), Motor driver shield L298P for Uno, BO motor straight 100 RPM × 4, 9 V battery and 9 V battery snap with DC jack.

How long does the mecanum wheel motion lab take to build?

About 240 minutes for a intermediate maker.