Idea
In short
How do you build a joystick-driven car?
A joystick sets forward, back and turning for a two-motor car on a motor shield. You need Arduino Uno R3, Motor driver shield L298P for Uno, Joystick module (dual axis), BO motor straight 100 RPM × 2, 9 V battery and 9 V battery snap with DC jack.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Drive a car with a joystick.
Parts list
- Development Boards
- Motor Drivers
- Sensors
- Motors & Actuators
- Batteries
- Power
How to build it
- Fit the shield
- Wire the motors
- Read the joystick
- Mix forward and turn
- Add a dead zone
Common questions
What parts do I need for the joystick-driven car?
Arduino Uno R3, Motor driver shield L298P for Uno, Joystick module (dual axis), BO motor straight 100 RPM × 2, 9 V battery and 9 V battery snap with DC jack.
How long does the joystick-driven car take to build?
About 240 minutes for a intermediate maker.
