Components / Motors and drivers / Continuous rotation servo (SG90 360°)

Continuous rotation servo (SG90 360°)

Servo that spins continuously; the pulse sets speed and direction.

TypeContinuous rotation servo
Supply voltage4.8 to 6 V
Control1.5 ms stop, shorter or longer pulses spin either way
Motors & ActuatorsReviewedMPN SG90 360Used in 2 projects
55°
In short

What is the Continuous rotation servo (SG90 360°) and what is it used for?

Servo that spins continuously; the pulse sets speed and direction. Makers use it for small wheeled robots.

How it works

An SG90 with the feedback potentiometer replaced by fixed resistors, so it acts as a geared motor with speed control.

Key specifications

Motor or actuator specValue
TypeContinuous rotation servo
Supply voltage4.8 to 6 V
Control1.5 ms stop, shorter or longer pulses spin either way

Pinout

BrownGND
Red5 V
OrangeSignal

How to use it

servo.write(90) stops it, lower values spin one way and higher the other, faster further from 90. Adjust the stop value in code if it creeps.

Applications

Alternatives

Buy at

Common questions

What is the Continuous rotation servo (SG90 360°) used for?

In maker projects: small wheeled robots.

How does the Continuous rotation servo (SG90 360°) work?

An SG90 with the feedback potentiometer replaced by fixed resistors, so it acts as a geared motor with speed control.

What voltage does the Continuous rotation servo (SG90 360°) need?

4.8 to 6 V.

What can I use instead of the Continuous rotation servo (SG90 360°)?

N20 micro metal gear motor and SG90 Micro Servo.