Idea
In short
How do you build a motor shield first spin?
A motor driver shield for the Uno spins two small gear motors forward and back, with a knob for speed. You need Arduino Uno R3, L293D motor driver shield for Uno, BO motor straight 100 RPM × 2, Potentiometer 10 kΩ, 9 V battery and 9 V battery snap with DC jack.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Drive two motors with a shield.
Parts list
- Development Boards
- Motor Drivers
- Motors & Actuators
- Passives
- Batteries
- Power
How to build it
- Fit the shield
- Connect the motors
- Power the motor side
- Spin forward and back
- Set speed with the knob
Common questions
What parts do I need for the motor shield first spin?
Arduino Uno R3, L293D motor driver shield for Uno, BO motor straight 100 RPM × 2, Potentiometer 10 kΩ, 9 V battery and 9 V battery snap with DC jack.
How long does the motor shield first spin take to build?
About 150 minutes for a beginner maker.
