Idea
In short
How do you build a long interval timer with a CD4060?
A CD4060 divides a clock into minute-long intervals to switch an LED or a small relay after a delay. You need CD4060 counter and oscillator, Resistor 100 kΩ, Resistor 10 kΩ, Ceramic Capacitor 100 nF, Electrolytic Capacitor 100 µF, LED 5 mm red, Resistor 220 Ω, NPN Transistor 2N2222 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a long delay without a microcontroller.
Parts list
- Integrated Circuits
- Passives
- Passives
- Passives
- Passives
- Semiconductors
- Passives
- Semiconductors
- Prototyping
How to build it
- Set the oscillator frequency
- Pick a divider output
- Drive an LED
- Add a reset button
- Measure the delay with a stopwatch
Common questions
What parts do I need for the long interval timer with a CD4060?
CD4060 counter and oscillator, Resistor 100 kΩ, Resistor 10 kΩ, Ceramic Capacitor 100 nF, Electrolytic Capacitor 100 µF, LED 5 mm red, Resistor 220 Ω, NPN Transistor 2N2222 and Breadboard 830 Tie Points.
How long does the long interval timer with a CD4060 take to build?
About 150 minutes for a intermediate maker.
