Idea
In short
How do you build a decade counter with LEDs?
A decade counter chip counts button presses in binary on four LEDs and resets after nine. You need 74LS90 decade counter, Tactile push button 6 mm × 2, LED 5 mm red × 4, Resistor 330 Ω × 4, Micro USB breakout board, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Count pulses in hardware.
Parts list
- Integrated Circuits
- Switches
- SemiconductorsLED 5 mm red × 4
- PassivesResistor 330 Ω × 4
- Connectors
- Power
- Prototyping
How to build it
- Power the chip from 5 V
- Wire the clock button
- Show the count on LEDs
- Add a reset button
- Read the binary sequence
Common questions
What parts do I need for the decade counter with LEDs?
74LS90 decade counter, Tactile push button 6 mm × 2, LED 5 mm red × 4, Resistor 330 Ω × 4, Micro USB breakout board, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
How long does the decade counter with LEDs take to build?
About 150 minutes for a beginner maker.
