How do you build a transistor NOR gate lab?
Build a NOR gate from two 2N2222 transistors and a few resistors, drive it from two switches and watch the output LED. You see how a single transistor makes an inverter and how two in parallel make a NOR. You need NPN Transistor 2N2222 × 2, Resistor 10 kΩ × 2, Resistor 1 kΩ, Resistor 330 Ω, LED 5 mm red, Tactile push button 6 mm × 2, 9 V battery, 9 V battery snap with DC jack, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Beginner
- Time
- About 70 min
- Parts
- 10
Build a NOR gate from two transistors.
Parts list
- Semiconductors
- PassivesResistor 10 kΩ × 2
- Passives
- Passives
- Semiconductors
- Switches
- Batteries
- Power
- Prototyping
- Prototyping
How to build it
- Build one transistor inverter first
- Add a second transistor in parallel
- Wire two switches as inputs
- Test all four combinations
- Chain two stages to make an OR
Common questions
What parts do I need for the transistor NOR gate lab?
NPN Transistor 2N2222 × 2, Resistor 10 kΩ × 2, Resistor 1 kΩ, Resistor 330 Ω, LED 5 mm red, Tactile push button 6 mm × 2, 9 V battery, 9 V battery snap with DC jack, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the transistor NOR gate lab take to build?
About 70 minutes for a beginner maker.
