CD4060 counter and oscillator
14-stage binary counter with an oscillator, makes slow timers.
FunctionRipple counter with oscillator
Supply voltage3 to 18 V
PackageDIP-16
Integrated CircuitsReviewedMPN CD4060BEUsed in 6 projects
In short
What is the CD4060 counter and oscillator and what is it used for?
14-stage binary counter with an oscillator, makes slow timers. Makers use it for long delays, clock dividers.
How it works
A 14-stage binary ripple counter with a built-in oscillator.
Key specifications
| Integrated circuit spec | Value |
|---|---|
| Function | Ripple counter with oscillator |
| Supply voltage | 3 to 18 V |
| Package | DIP-16 |
Pinout
1to 3Q12, Q13, Q14
4to 7Q6, Q5, Q7, Q4
8VSS
9Oscillator output (capacitor side)
10Oscillator output (resistor side)
11Oscillator input
12Reset, active HIGH
13to 15Q9, Q8, Q10
16VDD
How to use it
With a 32.768 kHz crystal, Q14 gives exactly 2 Hz, a classic clock base. Or use an RC network for long timers: each output halves the frequency. Tie Reset LOW for normal counting.
Applications
Long delaysclock dividers
Builds that use it
Alternatives
- NE555 Timer ICSimple oscillator and timer
Common questions
What is the CD4060 counter and oscillator used for?
In maker projects: long delays, clock dividers.
How does the CD4060 counter and oscillator work?
A 14-stage binary ripple counter with a built-in oscillator.
What voltage does the CD4060 counter and oscillator need?
3 to 18 V.
What can I use instead of the CD4060 counter and oscillator?
NE555 Timer IC.
