Projects / Ideas / Cycling jacket turn signals

Cycling jacket turn signals

BeginnerWearablesIdeaReviewed
In short

How do you build a cycling jacket turn signals?

Two buttons on the handlebar make arrow-shaped LED panels on a cycling jacket blink left or right, so drivers see where you are turning. You need Arduino Nano, WS2812B 8x8 RGB LED matrix × 2, Tactile push button 6 mm × 2, Li-Po battery 3.7 V 2000 mAh, TP4056 module with protection (USB-C) and MT3608 Boost Module.

Level
Beginner
Time
About 120 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Drive LED panels over a thin cable with a blink timer.

How to build it

  1. Sew two 8x8 LED matrices on the jacket back
  2. Draw left and right arrows in amber
  3. Blink an arrow while its button is held or for 5 s after a press
  4. Show a dim red tail light otherwise
  5. Boost the LiPo to 5 V and keep brightness low

Related projects

Common questions

What parts do I need for the cycling jacket turn signals?

Arduino Nano, WS2812B 8x8 RGB LED matrix × 2, Tactile push button 6 mm × 2, Li-Po battery 3.7 V 2000 mAh, TP4056 module with protection (USB-C) and MT3608 Boost Module.

How long does the cycling jacket turn signals take to build?

About 120 minutes for a beginner maker.