WS2812B 8x8 RGB LED matrix
64 addressable RGB LEDs on a flexible or rigid panel.
What is the WS2812B 8x8 RGB LED matrix and what is it used for?
64 addressable RGB LEDs on a flexible or rigid panel. Makers use it for pixel art, animations.
Each of the 64 LEDs has its own controller that takes its colour from the data stream and passes the rest on.
Key specifications
| Display spec | Value |
|---|---|
| Type | Addressable RGB LED matrix |
| Resolution | 8 × 8 |
| Driver IC | WS2812B per LED |
| Interface | Single data line |
| Supply voltage | 5 V, up to about 3.8 A at full white |
Pinout
How to use it
Use FastLED or Adafruit_NeoPixel. At full white it can draw about 3.8 A, so use a 5 V supply, a 1000 µF capacitor and a brightness limit. From a 3.3 V board use a 74HCT245 level shifter on the data line.
Applications
Builds that use it
Meeting room status light
Music spectrum analyser on LED matrix
Pixel art lamp
Pixel-art frame
Lights-out puzzle
One-player battleship
Word clock
Cycling jacket turn signals
Alternatives
- MAX7219 8x8 LED matrix moduleSingle colour, simpler power
- WS2812B addressable RGB LED strip (1 m, 60 LEDs)Strip version
Common questions
What is the WS2812B 8x8 RGB LED matrix used for?
In maker projects: pixel art, animations.
How does the WS2812B 8x8 RGB LED matrix work?
Each of the 64 LEDs has its own controller that takes its colour from the data stream and passes the rest on.
What voltage does the WS2812B 8x8 RGB LED matrix need?
5 V, up to about 3.8 A at full white.
How do I connect the WS2812B 8x8 RGB LED matrix to an Arduino or ESP32?
Single data line. Pins: DIN (Data in (330 Ω series resistor)), 5V (Supply), GND (Ground), DOUT (Data out to chain).
What can I use instead of the WS2812B 8x8 RGB LED matrix?
MAX7219 8x8 LED matrix module and WS2812B addressable RGB LED strip (1 m, 60 LEDs).
