Projects / Ideas / Step-counting wristband

Step-counting wristband

IntermediateWearablesIdeaReviewed
In short

How do you build a step-counting wristband?

An accelerometer counts steps from arm swing, with a display of the day's total. A hobby gadget, not a fitness device. You need Arduino Nano, MPU6050 IMU, SSD1306 OLED Display, Tactile push button 6 mm, Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C), MT3608 Boost Module and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 300 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Count steps from acceleration.

How to build it

  1. Wire the sensor and display
  2. Read acceleration magnitude
  3. Find peaks
  4. Count steps with a lock-out
  5. Reset with a button

Related projects

Common questions

What parts do I need for the step-counting wristband?

Arduino Nano, MPU6050 IMU, SSD1306 OLED Display, Tactile push button 6 mm, Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C), MT3608 Boost Module and Breadboard 830 Tie Points.

How long does the step-counting wristband take to build?

About 300 minutes for a intermediate maker.