Idea
In short
How do you build an emotion face display?
A little face on an 8 by 8 colour matrix shows happy, sad, surprised and sleepy expressions, picked with three buttons, with a blink now and then. It is a gentle way to learn bitmaps and animation, and a fun badge for a robot. You need Arduino Nano, WS2812B 8x8 RGB LED matrix, Tactile push button 6 mm × 3, Resistor 330 Ω, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Beginner
- Time
- About 80 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Show faces that change with a button.
Parts list
- Development Boards
- Displays
- Switches
- Passives
- Prototyping
- Prototyping
How to build it
- Draw a face as a pattern of pixels
- Switch faces with the buttons
- Blink the eyes now and then
- Fade between faces
- Add a sleepy face after a minute of quiet
Common questions
What parts do I need for the emotion face display?
Arduino Nano, WS2812B 8x8 RGB LED matrix, Tactile push button 6 mm × 3, Resistor 330 Ω, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the emotion face display take to build?
About 80 minutes for a beginner maker.
