Idea
In short
How do you build a tea withering monitor?
Weight loss of tea leaves on trays tells when withering is done. You need ESP32 DevKit V1, Load cell 5 kg (bar type), HX711 load cell amplifier, SHT31 temperature and humidity sensor and SSD1306 OLED Display.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use weight change to track drying.
Parts list
- Development Boards
- Sensors
- Sensors
- Sensors
- Displays
How to build it
- Weigh a sample tray
- Record weight each 10 minutes
- Work out percent lost
- Alert at the target
- Log batches
Common questions
What parts do I need for the tea withering monitor?
ESP32 DevKit V1, Load cell 5 kg (bar type), HX711 load cell amplifier, SHT31 temperature and humidity sensor and SSD1306 OLED Display.
How long does the tea withering monitor take to build?
About 150 minutes for a intermediate maker.
