Idea
In short
How do you build a beehive weight monitor?
Load cells under a hive record its weight daily, showing nectar flow in spring and stores falling in winter. You need ESP32 DevKit V1, Load cell 20 kg × 4, HX711 load cell amplifier, SHT31 temperature and humidity sensor, Solar panel 6 V 1 W and CN3065 solar Li-ion charger module.
- Level
- Advanced
- Time
- About 300 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use four load cells and an amplifier outdoors for months.
Parts list
- Development Boards
- SensorsLoad cell 20 kg × 4
- Sensors
- Sensors
- Power
- Power
How to build it
- Wire four cells into a bridge
- Calibrate with a known weight
- Log weight, temperature and humidity every hour
- Compensate for temperature drift
- Send a daily value over Wi-Fi
Common questions
What parts do I need for the beehive weight monitor?
ESP32 DevKit V1, Load cell 20 kg × 4, HX711 load cell amplifier, SHT31 temperature and humidity sensor, Solar panel 6 V 1 W and CN3065 solar Li-ion charger module.
How long does the beehive weight monitor take to build?
About 300 minutes for a advanced maker.
