Idea
In short
How do you build a silkworm rearing box monitor?
An ESP32 with an SHT31 sensor watches the temperature and humidity of a small silkworm rearing tray, shows them on an OLED and sounds a buzzer if they leave the range that suits the worms. Keep the sensor out of the leaves and the worms. You need ESP32 DevKit V1, SHT31 temperature and humidity sensor, SSD1306 OLED Display, Active buzzer 5 V, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Keep a rearing tray in a safe range.
Parts list
- Development Boards
- Sensors
- Displays
- Motors & Actuators
- Switches
- Prototyping
How to build it
- Wire the sensor and display
- Read temperature and humidity
- Set the safe ranges
- Buzz when out of range
- Mute with the button
Common questions
What parts do I need for the silkworm rearing box monitor?
ESP32 DevKit V1, SHT31 temperature and humidity sensor, SSD1306 OLED Display, Active buzzer 5 V, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the silkworm rearing box monitor take to build?
About 120 minutes for a intermediate maker.
