Idea
In short
How do you build a fruit ripening chamber?
A box holds temperature and humidity steady for ripening bananas or mangoes. You need ESP32 DevKit V1, SHT31 temperature and humidity sensor, Relay module 1-channel 12 V, 12 V DC fan 80 mm, Relay module 4-channel 5 V and 12 V 2 A DC adapter.
- Level
- Intermediate
- Time
- About 300 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control a small climate chamber.
Parts list
- Development Boards
- Sensors
- InterfacesSwitches a heater
- Motors & Actuators
- Interfaces
- Power
How to build it
- Set target temperature
- Control heat and fan
- Add humidity with a humidifier
- Log the cycle
- Show days to ripe
Common questions
What parts do I need for the fruit ripening chamber?
ESP32 DevKit V1, SHT31 temperature and humidity sensor, Relay module 1-channel 12 V, 12 V DC fan 80 mm, Relay module 4-channel 5 V and 12 V 2 A DC adapter. Relay module 1-channel 12 V: Switches a heater.
How long does the fruit ripening chamber take to build?
About 300 minutes for a intermediate maker.
