Idea
In short
How do you build a power input board?
A small board with a barrel jack, a series diode, a smoothing capacitor and an LED, ready to feed projects safely from a wall adapter. You need DC barrel jack 5.5 × 2.1 mm (PCB), Rectifier Diode 1N4007, Electrolytic Capacitor 100 µF, LED 5 mm green, Resistor 1 kΩ, Perfboard (dot PCB) 7 × 9 cm and 12 V 2 A DC adapter.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a protected power input.
Parts list
- Connectors
- Semiconductors
- Passives
- Semiconductors
- Passives
- Prototyping
- Power
How to build it
- Draw the schematic
- Place the jack and diode
- Add the capacitor
- Add the indicator LED
- Test with a meter before use
Common questions
What parts do I need for the power input board?
DC barrel jack 5.5 × 2.1 mm (PCB), Rectifier Diode 1N4007, Electrolytic Capacitor 100 µF, LED 5 mm green, Resistor 1 kΩ, Perfboard (dot PCB) 7 × 9 cm and 12 V 2 A DC adapter.
How long does the power input board take to build?
About 120 minutes for a beginner maker.
