Idea
In short
How do you build a fixed regulator family on the bench?
Run 9 V and 12 V regulators from one adapter, measure their output and dropout and see how they heat. You need 7809 voltage regulator, 7812 voltage regulator, 12 V 2 A DC adapter, Resistor 330 Ω × 2, Electrolytic Capacitor 100 µF × 2, Ceramic Capacitor 100 nF × 2, Digital multimeter and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Compare the 78xx family.
Parts list
- Power
- Power
- Power
- PassivesResistor 330 Ω × 2
- Passives
- Passives
- Tools & Instruments
- Prototyping
How to build it
- Wire each with its capacitors
- Measure the no-load output
- Add a small load
- Lower the input to find dropout
- Feel for heat after power off
Common questions
What parts do I need for the fixed regulator family on the bench?
7809 voltage regulator, 7812 voltage regulator, 12 V 2 A DC adapter, Resistor 330 Ω × 2, Electrolytic Capacitor 100 µF × 2, Ceramic Capacitor 100 nF × 2, Digital multimeter and Breadboard 830 Tie Points.
How long does the fixed regulator family on the bench take to build?
About 120 minutes for a beginner maker.
