Projects / Ideas / Pocket adjustable supply

Pocket adjustable supply

IntermediatePowerIdeaReviewed
In short

How do you build a pocket adjustable supply?

A small buck module turns a 12 V adapter into an adjustable low voltage for bench tests. Set the voltage with a meter before you connect any circuit. You need MP1584 buck module, 12 V 2 A DC adapter, Digital multimeter, LED 5 mm red, Resistor 330 Ω and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 180 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Make an adjustable supply.

Parts list

How to build it

  1. Check the module markings
  2. Connect the adapter
  3. Set 5 V with a meter
  4. Add a test LED
  5. Note the range and ripple

Related projects

Common questions

What parts do I need for the pocket adjustable supply?

MP1584 buck module, 12 V 2 A DC adapter, Digital multimeter, LED 5 mm red, Resistor 330 Ω and Breadboard 830 Tie Points.

How long does the pocket adjustable supply take to build?

About 180 minutes for a intermediate maker.