Lab / AKTU / Analog and linear ICs / Experiment 13

Fixed voltage regulator (78xx) and regulated power supply

Analog and linear ICsVirtual readings4 viva questionsRecord book ready
Open virtual bench
Aim

To build a regulated 5 V supply with a 7805 and measure its line and load regulation and dropout.

Apparatus
  • IC 7805
  • Capacitors 0.33 µF (input) and 0.1 µF (output)
  • Variable DC supply
  • Load resistors
  • Multimeter

Theory

A 78xx linear regulator holds its output constant (5 V for a 7805) as long as the input stays at least about 2 V above the output (the dropout voltage). The extra voltage is dropped across the regulator as heat: P = (Vin − Vout) × I.

Read the lesson: Linear regulators ›
Circuit connections
  • Input → pin 1, ground → pin 2, output → pin 3; 0.33 µF from input to ground, 0.1 µF from output to ground

Procedure

Pre-lab check

4 questions · 75% to be ready
1What is dropout voltage?
2Why the input and output capacitors?
3What does 7912 mean?
4Why is an LDO or buck converter sometimes better?

Try the readings before the lab

Calculated, not measured. In the lab, write down your own readings.
01.352.74.055.457.5101315Vin (V)Vout (V)
Vin (V)Vout (V)I (mA)Regulator heat (W)
53300.06
64400.08
75500.1
85500.15
95500.2
105500.25
125500.35
155500.5

Precautions

  • Fit a heat sink if the dissipation goes above about 1 W.
  • Place the capacitors close to the pins.

My readings

Type what you measured. It goes into your record book, and to My Garage when you are signed in.

S. No.Vin (V)Vout (V)I (mA)Regulator heat (W)
1
2
3
4
5
6

Check my readings

Put the value you set in the first column, then compare. Real parts have tolerance.

Open my record book
Result

The output stays at ___ V for inputs above ___ V (dropout ≈ ___ V). Load regulation = ___ %.

Everything above is free. The print-ready write-up comes with Maker.

Printed pages leave the observation table empty for your own readings.

Viva questions

Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.

1. What is dropout voltage?
2. Why the input and output capacitors?
3. What does 7912 mean?
4. Why is an LDO or buck converter sometimes better?

Quick answers for your record and viva

What is the aim of the fixed voltage regulator (78xx) and regulated power supply experiment?

To build a regulated 5 V supply with a 7805 and measure its line and load regulation and dropout.

What apparatus is needed for fixed voltage regulator (78xx) and regulated power supply?

IC 7805, Capacitors 0.33 µF (input) and 0.1 µF (output), Variable DC supply, Load resistors, Multimeter.

What is the theory behind fixed voltage regulator (78xx) and regulated power supply?

A 78xx linear regulator holds its output constant (5 V for a 7805) as long as the input stays at least about 2 V above the output (the dropout voltage). The extra voltage is dropped across the regulator as heat: P = (Vin − Vout) × I.

What result should I get in fixed voltage regulator (78xx) and regulated power supply?

The output stays at ___ V for inputs above ___ V (dropout ≈ ___ V). Load regulation = ___ %.

What precautions should I take in fixed voltage regulator (78xx) and regulated power supply?

Fit a heat sink if the dissipation goes above about 1 W. Place the capacitors close to the pins.

Fixed voltage regulator (78xx) and regulated power supply