Lab / Virtual lab / Diodes and power supplies

7805 regulator: dropout and line regulation

Find the input voltage where a 7805 starts regulating, its line regulation and the heat it must get rid of.

Diodes and power suppliesSimulatedFull experiment write-up →

Circuit

Updates as you change values
9 V78057805C0.1 µFRL100 ΩV

A 7805 with 0.33 µF and 0.1 µF capacitors, a variable DC input and a load resistor; read the output.

Controls

Changing any setting except input voltage starts a new set of readings.

Meters

Output5 V
Regulator heat0.2 W

Graph

0 readings

Your graph appears here

Take readings, or press Auto sweep to log a full set.

your readings

Theory

  • VO = 5 V once Vin ≥ VO + dropout (about 2 V for a 7805)
  • Line regulation = ΔVO / ΔVin (datasheet: a few mV per volt)
  • Heat PD = (Vin − VO) × IL
  • Junction temperature TJ = TA + PD × θJA (θJA ≈ 65 °C/W for a bare TO-220)
  • Keep TJ under 125 °C; add a heatsink above about 1 W

Worked out for your values

Load current
50.04 mA
Regulates from Vin
7 V
Heat in the regulator
200 mW
Junction temp (25 °C room, no heatsink)
38 °C
Efficiency
56 %

Your result

Worked out from your readings and compared with theory.

Input where VO reaches 4.95 V (dropout point)

Take readings between 5 V and 8 V input.

Line regulation

Take two or more readings above 8 V.

Sources of error

  • Output varies ±4 % between parts (4.8 V to 5.2 V)
  • Thermal shutdown at high input and load
  • Meter resolution: line regulation needs mV readings