Lab / MAKAUT / Circuits and measurements / Experiment 2

Verification of Ohm's law

Circuits and measurementsVirtual readings4 viva questionsRecord book ready
Open virtual bench
Aim

To verify that the current through a resistor is proportional to the voltage across it, and find its resistance from the slope.

Apparatus
  • Variable DC supply 0–10 V
  • Resistor 1 kΩ (¼ W)
  • Ammeter or multimeter (mA range)
  • Voltmeter
  • Breadboard and wires
Vout = 2.5 V

Theory

Ohm's law states that at constant temperature the current I through a conductor is proportional to the voltage V across it: V = I R. A graph of I against V is a straight line through the origin, and its slope is 1/R.

Read the lesson: Ohm power ›
Circuit connections
  • Supply + → ammeter → resistor → supply −
  • Voltmeter across the resistor

Procedure

Pre-lab check

4 questions · 75% to be ready
1State Ohm's law.
2Why must temperature stay constant?
3Is a diode ohmic?
4What happens if you put the ammeter in parallel?

Try the readings before the lab

Calculated, not measured. In the lab, write down your own readings.
02.75.48.11102.557.510V (V)I (mA)
V (V)I (mA)R = V/I (Ω)Power (mW)
00–0
2210004
44100016
66100036
88100064
10101000100

Precautions

  • Keep the power in the resistor below its rating (P = V²/R).
  • Connect the ammeter in series and the voltmeter in parallel.
  • Start from 0 V.

My readings

Type what you measured. It goes into your record book, and to My Garage when you are signed in.

S. No.V (V)I (mA)R = V/I (Ω)Power (mW)
1
2
3
4
5
6

Check my readings

Put the value you set in the first column, then compare. Real parts have tolerance.

Open my record book
Result

The I–V graph is a straight line through the origin, so Ohm's law is verified. Resistance from the slope = ___ Ω (colour code value ___ Ω).

Everything above is free. The print-ready write-up comes with Maker.

Printed pages leave the observation table empty for your own readings.

Viva questions

Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.

1. State Ohm's law.
2. Why must temperature stay constant?
3. Is a diode ohmic?
4. What happens if you put the ammeter in parallel?

Quick answers for your record and viva

What is the aim of the verification of ohm's law experiment?

To verify that the current through a resistor is proportional to the voltage across it, and find its resistance from the slope.

What apparatus is needed for verification of ohm's law?

Variable DC supply 0–10 V, Resistor 1 kΩ (¼ W), Ammeter or multimeter (mA range), Voltmeter, Breadboard and wires.

What is the theory behind verification of ohm's law?

Ohm's law states that at constant temperature the current I through a conductor is proportional to the voltage V across it: V = I R. A graph of I against V is a straight line through the origin, and its slope is 1/R.

What result should I get in verification of ohm's law?

The I–V graph is a straight line through the origin, so Ohm's law is verified. Resistance from the slope = ___ Ω (colour code value ___ Ω).

What precautions should I take in verification of ohm's law?

Keep the power in the resistor below its rating (P = V²/R). Connect the ammeter in series and the voltmeter in parallel. Start from 0 V.

Verification of Ohm's law: lab experiment, theory and viva