Lab / MAKAUT / Circuits and measurements / Experiment 3

Verification of KVL and KCL

Circuits and measurementsVirtual readings4 viva questionsRecord book ready
Aim

To verify Kirchhoff's voltage law in a series circuit and Kirchhoff's current law at a node.

Apparatus
  • DC supply
  • Resistors 1 kΩ, 2.2 kΩ, 3.3 kΩ
  • Multimeter
  • Breadboard

Theory

KVL: around any closed loop, the algebraic sum of voltages is zero, so the supply equals the sum of the drops. KCL: the sum of currents entering a node equals the sum leaving it. In a parallel circuit, the supply current equals the sum of the branch currents.

Read the lesson: Resistor networks ›
Circuit connections
  • KVL: supply → R1 → R2 → R3 → back to supply
  • KCL: R1, R2 and R3 each from the + node to −; measure each branch current and the total

Procedure

Pre-lab check

4 questions · 75% to be ready
1KVL follows from which conservation law?
2KCL follows from which conservation law?
3Why may the sum differ slightly from the supply?
4Does KVL hold for AC circuits?

Try the readings before the lab

Calculated, not measured. In the lab, write down your own readings.
QuantityR1R2R3SumCheck
Series: voltage drop (V)1.543.385.0810= supply 10 V
Parallel: branch current (mA)104.553.0317.58= total current

Precautions

  • Note the sign (polarity) of each reading.
  • Measure currents by breaking the branch and inserting the meter.

My readings

Type what you measured. It goes into your record book, and to My Garage when you are signed in.

S. No.QuantityR1R2R3SumCheck
1
2
3
4
5
6

Check my readings

Put the value you set in the first column, then compare. Real parts have tolerance.

Open my record book
Result

Sum of voltage drops = ___ V ≈ supply voltage (KVL verified). Sum of branch currents = ___ mA ≈ total current (KCL verified).

Everything above is free. The print-ready write-up comes with Maker.

Printed pages leave the observation table empty for your own readings.

Viva questions

Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.

1. KVL follows from which conservation law?
2. KCL follows from which conservation law?
3. Why may the sum differ slightly from the supply?
4. Does KVL hold for AC circuits?

Quick answers for your record and viva

What is the aim of the verification of kvl and kcl experiment?

To verify Kirchhoff's voltage law in a series circuit and Kirchhoff's current law at a node.

What apparatus is needed for verification of kvl and kcl?

DC supply, Resistors 1 kΩ, 2.2 kΩ, 3.3 kΩ, Multimeter, Breadboard.

What is the theory behind verification of kvl and kcl?

KVL: around any closed loop, the algebraic sum of voltages is zero, so the supply equals the sum of the drops. KCL: the sum of currents entering a node equals the sum leaving it. In a parallel circuit, the supply current equals the sum of the branch currents.

What result should I get in verification of kvl and kcl?

Sum of voltage drops = ___ V ≈ supply voltage (KVL verified). Sum of branch currents = ___ mA ≈ total current (KCL verified).

What precautions should I take in verification of kvl and kcl?

Note the sign (polarity) of each reading. Measure currents by breaking the branch and inserting the meter.

Verification of KVL and KCL: lab experiment, theory and viva