Lab / MAKAUT / Circuits and measurements / Experiment 6

Verification of the maximum power transfer theorem

Circuits and measurementsVirtual readings4 viva questionsRecord book ready
Open virtual bench
Aim

To verify that a source delivers maximum power to the load when the load resistance equals the source's internal (Thevenin) resistance.

Apparatus
  • DC supply
  • Resistor Rs (1 kΩ) as the source resistance
  • Decade resistance box (load)
  • Multimeter
Vout = 2.5 V

Theory

A source of EMF V with internal resistance Rs delivers P = V²·RL / (Rs + RL)² to a load RL. P is largest when RL = Rs, and then Pmax = V² / 4Rs. Efficiency at that point is only 50%.

Read the lesson: Ohm power ›
Circuit connections
  • Supply → Rs → load RL → back to supply; voltmeter across RL

Procedure

Pre-lab check

4 questions · 75% to be ready
1What is the efficiency at maximum power transfer?
2Where is maximum power transfer used?
3Why is it not used in power distribution?
4What is the AC version of the condition?

Try the readings before the lab

Calculated, not measured. In the lab, write down your own readings.
Pmax = V² / 4Rs25 mW at RL = 1000 Ω
06.751420271001.3k2.5k3.8k5.0kRL (Ω)P (mW)
RL (Ω)VL (V)IL (mA)P (mW)Efficiency (%)
1000.919.0918.269.1
250281620
5003.336.66722.2233.3
7504.295.71424.4942.9
1000552550
1500642460
20006.673.33322.2266.7
30007.52.518.7575
50008.331.66713.8983.3

Precautions

  • Check the resistor power ratings at the peak.
  • Take readings closely around RL = Rs.

My readings

Type what you measured. It goes into your record book, and to My Garage when you are signed in.

S. No.RL (Ω)VL (V)IL (mA)P (mW)Efficiency (%)
1
2
3
4
5
6

Check my readings

Put the value you set in the first column, then compare. Real parts have tolerance.

Open my record book
Result

Power is maximum (___ mW) at RL = ___ Ω, which equals Rs. The theorem is verified.

Everything above is free. The print-ready write-up comes with Maker.

Printed pages leave the observation table empty for your own readings.

Viva questions

Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.

1. What is the efficiency at maximum power transfer?
2. Where is maximum power transfer used?
3. Why is it not used in power distribution?
4. What is the AC version of the condition?

Quick answers for your record and viva

What is the aim of the verification of the maximum power transfer theorem experiment?

To verify that a source delivers maximum power to the load when the load resistance equals the source's internal (Thevenin) resistance.

What apparatus is needed for verification of the maximum power transfer theorem?

DC supply, Resistor Rs (1 kΩ) as the source resistance, Decade resistance box (load), Multimeter.

What is the theory behind verification of the maximum power transfer theorem?

A source of EMF V with internal resistance Rs delivers P = V²·RL / (Rs + RL)² to a load RL. P is largest when RL = Rs, and then Pmax = V² / 4Rs. Efficiency at that point is only 50%.

What result should I get in verification of the maximum power transfer theorem?

Power is maximum (___ mW) at RL = ___ Ω, which equals Rs. The theorem is verified.

What precautions should I take in verification of the maximum power transfer theorem?

Check the resistor power ratings at the peak. Take readings closely around RL = Rs.

Verification of the maximum power transfer theorem