Lab / Virtual lab / DC circuits
Ohm's law
Show that current through a resistor is proportional to the voltage across it.
Circuit
Updates as you change valuesA variable DC supply across one resistor, with an ammeter in series and a voltmeter across the resistor.
Controls
Changing any setting except supply voltage starts a new set of readings.
Meters
Current2 mA
Power4 mW
Graph
0 readingsYour graph appears here
Take readings, or press Auto sweep to log a full set.
your readings
Theory
- V = I × R
- I = V / R, so the V-I graph is a straight line through the origin
- Slope of I against V = 1 / R
- P = V × I = V² / R (a ¼ W resistor limits V to √(0.25 R))
Worked out for your values
- Current
- 2 mA
- Power in R
- 4 mW
- Max safe voltage (¼ W)
- 15.81 V
Your result
Worked out from your readings and compared with theory.
Resistance from the slope
Take two or more readings at different voltages.
Sources of error
- Resistor tolerance (gold band ±5 %)
- Voltmeter draws a little current (meter loading)
- Resistor warms up at high power and its value drifts
- Meter resolution on the lowest range
