Tools / Power budget
How to work out a power budget
A regulator or converter never delivers all it takes in. Efficiency tells you how much extra the source must supply.
Pin = V × I ÷ efficiency
Result
- Power out
- 2.5 W
- Power in (estimated)
- 2.941 W
What this leaves out
- Rough estimate; account for startup loads, regulator thermal limits and supply headroom.
Step by step
The working with your numbers
- Output power
Pout = V × I = 5 × 0.5 A = 2.5 W - Efficiency as a fraction
η = 85 % ÷ 100 = 0.85 - Input power
Pin = Pout ÷ η = 2.5 W ÷ 0.85 = 2.94 W - Lost as heat
Ploss = Pin − Pout = 441 mW
Does the answer make sense?
- OK: Add about 25 % margin: size the supply for at least 3.68 W.
- OK: From a 12 V source that is about 245 mA; from 5 V USB about 588 mA.
Common mistakes
- Adding up the typical currents only. Wi-Fi radios, motors and servos have peaks several times higher.
- Using a linear regulator's 'efficiency' as a fixed number. For a linear regulator it is simply Vout ÷ Vin.
- Forgetting the heat. The lost power warms the converter and its surroundings.
Learn it, try it, build it
Calculated, not measured. Check the exact part datasheet and your real circuit before powering anything.
Just need the number? Use the power budget calculator on Geekobot.
Common questions
How do you work out the input power of a converter?
Divide the output power by the efficiency. A 5 V, 500 mA load is 2.5 W; at 85 % efficiency the input is 2.5 ÷ 0.85 ≈ 2.94 W.
How much margin should a power supply have?
Size it for at least 25 % more than your worked-out peak, so it runs cool and handles start-up surges.
