Lab / Virtual lab / DC circuits

Maximum power transfer

Find the load resistance that takes the most power from a source with internal resistance.

DC circuitsSimulatedFull experiment write-up →

Circuit

Updates as you change values
10 VRs 1 kΩARL500 ΩV

A 10 V source with a series (internal) resistance Rs driving a variable load resistor RL.

Controls

Changing any setting except load resistance starts a new set of readings.

Meters

Load voltage3.33 V
Current6.67 mA
Load power22.2 mW

Graph

0 readings

Your graph appears here

Take readings, or press Auto sweep to log a full set.

your readings

Theory

  • I = V / (Rs + RL)
  • P = I² RL = V² RL / (Rs + RL)²
  • dP/dRL = 0 gives RL = Rs, Pmax = V² / 4Rs
  • Efficiency η = RL / (Rs + RL): only 50 % at maximum power

Worked out for your values

Load power
22.22 mW
Maximum power (RL = Rs)
25 mW
Efficiency
33.3 %
Load current
6.667 mA

Your result

Worked out from your readings and compared with theory.

RL at peak power

Take readings on both sides of the peak.

Peak power

Take readings on both sides of the peak.

Rs from the V-I line (−slope)

Take two or more readings.

Sources of error

  • Internal resistance of a real supply adds to Rs
  • Decade box steps are coarse near the peak
  • Contact and wire resistance at low RL