Components / Sensors / SCT-013 split-core current transformer

SCT-013 split-core current transformer

Clamp-on CT that measures AC current without cutting the wire.

MeasuresAC current
Range0 to 100 A
InterfaceCurrent output (needs a burden resistor), or voltage-output versions
Watch out forClamp one wire only, not the whole cable
SensorsReviewedMPN SCT-013-000Used in 4 projects
SCT013
In short

What is the SCT-013 split-core current transformer and what is it used for?

Clamp-on CT that measures AC current without cutting the wire. Makers use it for home energy monitoring.

How it works

The wire is a one-turn primary; 2,000 turns on the clamp produce a proportional secondary current.

Key specifications

Sensor specValue
MeasuresAC current
Range0 to 100 A
InterfaceCurrent output (needs a burden resistor), or voltage-output versions
Watch out forClamp one wire only, not the whole cable

Pinout

TipSecondary output
SleeveSecondary output
RingNot used on most 3.5 mm plugs

How to use it

Clip it around one conductor only. The 000 version outputs current and needs a burden resistor (for example 33 to 68 Ω) and a mid-supply bias for the ADC; the 030 and other V versions have the burden built in. Use the EmonLib library to compute RMS current.

Applications

Alternatives

Buy at

Common questions

What is the SCT-013 split-core current transformer used for?

In maker projects: home energy monitoring.

How does the SCT-013 split-core current transformer work?

The wire is a one-turn primary; 2,000 turns on the clamp produce a proportional secondary current.

How do I connect the SCT-013 split-core current transformer to an Arduino or ESP32?

Current output (needs a burden resistor), or voltage-output versions. Pins: Tip (Secondary output), Sleeve (Secondary output), Ring (Not used on most 3.5 mm plugs).

What can I use instead of the SCT-013 split-core current transformer?

ACS712 current sensor module (5 A / 20 A / 30 A) and PZEM-004T energy meter module.