Idea
In short
How do you build a home energy monitor with a clamp sensor?
An SCT-013 clamp on the main cable and an ESP32 estimate household power and units used, without cutting any wires. You need ESP32 DevKit V1, SCT-013 split-core current transformer, Resistor 10 kΩ × 2, Electrolytic capacitor 10 µF and SSD1306 OLED Display.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure AC current with a current transformer and compute RMS.
Parts list
- Development Boards
- Sensors
- PassivesResistor 10 kΩ × 2
- Passives
- Displays
How to build it
- Clamp the SCT-013 around one conductor (live) only
- Bias it at half the supply with two 10 kΩ resistors
- Sample fast and compute RMS current
- Multiply by an assumed 230 V for apparent power
- Add up kWh and compare with the electricity meter
Common questions
What parts do I need for the home energy monitor with a clamp sensor?
ESP32 DevKit V1, SCT-013 split-core current transformer, Resistor 10 kΩ × 2, Electrolytic capacitor 10 µF and SSD1306 OLED Display.
How long does the home energy monitor with a clamp sensor take to build?
About 180 minutes for a intermediate maker.
