Idea
In short
How do you build an EV charging session logger?
A CT clamp on the charger circuit logs energy for each charging session and the cost at your tariff. You need ESP32 DevKit V1, SCT-013 split-core current transformer, Resistor 10 kΩ × 2, Electrolytic capacitor 10 µF and 5 V 2 A USB adapter.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure AC energy without touching live wires.
Parts list
- Development Boards
- Sensors
- PassivesResistor 10 kΩ × 2
- Passives
- Power
How to build it
- Clamp the CT around one live wire only
- Bias and sample the signal
- Work out RMS current and energy
- Detect session start and end
- Show cost per session
Common questions
What parts do I need for the EV charging session logger?
ESP32 DevKit V1, SCT-013 split-core current transformer, Resistor 10 kΩ × 2, Electrolytic capacitor 10 µF and 5 V 2 A USB adapter.
How long does the EV charging session logger take to build?
About 180 minutes for a intermediate maker.
