PZEM-004T energy meter module
Measures voltage, current, power and energy on mains.
What is the PZEM-004T energy meter module and what is it used for?
Measures voltage, current, power and energy on mains. Makers use it for appliance energy logging.
A metering chip samples voltage and current and calculates power, energy, frequency and power factor.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | AC voltage, current, power, energy, frequency, power factor |
| Range | 80 to 260 V, 0 to 100 A |
| Interface | UART (Modbus RTU), isolated |
| Watch out for | Mains wiring: enclose it |
Pinout
How to use it
Connect the TTL side to your board at 9600 baud with the PZEM004Tv30 library; the TTL side is isolated from mains. Mains wiring must be done by a trained person in an enclosure.
Applications
Builds that use it
Alternatives
- SCT-013 split-core current transformerCurrent only, no mains connection
Common questions
What is the PZEM-004T energy meter module used for?
In maker projects: appliance energy logging.
How does the PZEM-004T energy meter module work?
A metering chip samples voltage and current and calculates power, energy, frequency and power factor.
How do I connect the PZEM-004T energy meter module to an Arduino or ESP32?
UART (Modbus RTU), isolated. Pins: 5V (TTL side supply), RX (UART in), TX (UART out), GND (Ground), L and N (Mains voltage input), CT (Current transformer connector).
What can I use instead of the PZEM-004T energy meter module?
SCT-013 split-core current transformer.
