Idea
In short
How do you build a clamp sensor current learning rig?
A split-core current transformer is learned on a safe low-voltage circuit first, and mains is only measured by a qualified electrician. You need Arduino Nano, SCT-013 split-core current transformer, Resistor 10 kΩ × 2, Electrolytic capacitor 10 µF, Resistor 100 kΩ × 2, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 330 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Learn current-transformer signal conditioning.
Parts list
- Development Boards
- Sensors
- PassivesResistor 10 kΩ × 2
- Passives
- PassivesResistor 100 kΩ × 2
- Displays
- Prototyping
How to build it
- Read the sensor notes
- Add a burden resistor
- Bias to mid-supply
- Sample the AC waveform
- Compute RMS on a low-voltage test loop
Common questions
What parts do I need for the clamp sensor current learning rig?
Arduino Nano, SCT-013 split-core current transformer, Resistor 10 kΩ × 2, Electrolytic capacitor 10 µF, Resistor 100 kΩ × 2, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the clamp sensor current learning rig take to build?
About 330 minutes for a advanced maker.
