Idea
In short
How do you build a machine run-time tracker?
A current clamp on a machine logs when it runs and idles, and shows daily use for a workshop. You need ESP32 DevKit V1, SCT-013 split-core current transformer, Resistor 10 kΩ × 2, Electrolytic capacitor 10 µF and 5 V 2 A USB adapter.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Track machine state from current.
Parts list
- Development Boards
- Sensors
- PassivesResistor 10 kΩ × 2
- Passives
- Power
How to build it
- Clamp the CT on one live wire
- Detect running from current level
- Log state changes with time
- Work out run hours per day
- Show a dashboard
Common questions
What parts do I need for the machine run-time tracker?
ESP32 DevKit V1, SCT-013 split-core current transformer, Resistor 10 kΩ × 2, Electrolytic capacitor 10 µF and 5 V 2 A USB adapter.
How long does the machine run-time tracker take to build?
About 150 minutes for a intermediate maker.
