Components / Interface and audio modules / Relay module 2-channel 5 V

Relay module 2-channel 5 V

Two relays with optocouplers.

Function2 × SPDT relays
Supply voltage5 V
Interface2 inputs, active LOW on most
Rating10 A 250 V AC (derate)
InterfacesReviewedMPN 2CH relay moduleUsed in 17 projects
ON
In short

What is the Relay module 2-channel 5 V and what is it used for?

Two relays with optocouplers. Makers use it for two-appliance control.

How it works

Optocoupled transistor drivers switch two 5 V relays.

Key specifications

Interface module specValue
Function2 × SPDT relays
Supply voltage5 V
Interface2 inputs, active LOW on most
Rating10 A 250 V AC (derate)
Logic level5 V

Pinout

VCC GND5 V
IN1 IN2Active low on most
JD-VCCCoil supply jumper
COM NO NCContacts

How to use it

Same as the 4-channel board. Use NO for loads that should be off when the board is off.

Applications

Alternatives

Buy at

Common questions

What is the Relay module 2-channel 5 V used for?

In maker projects: two-appliance control.

How does the Relay module 2-channel 5 V work?

Optocoupled transistor drivers switch two 5 V relays.

What voltage does the Relay module 2-channel 5 V need?

5 V.

How do I connect the Relay module 2-channel 5 V to an Arduino or ESP32?

2 inputs, active LOW on most. Pins: VCC GND (5 V), IN1 IN2 (Active low on most), JD-VCC (Coil supply jumper), COM NO NC (Contacts).

What can I use instead of the Relay module 2-channel 5 V?

Relay module 4-channel 5 V and Relay Module 5V.