Components / Interface and audio modules / Relay module 4-channel 5 V

Relay module 4-channel 5 V

Four relays with optocouplers on one board.

Function4 × SPDT relays with driver
Supply voltage5 V, about 70 mA per active relay
Interface4 inputs (active LOW on most)
Rating10 A 250 V AC per contact (derate to 5 A)
InterfacesReviewedMPN 4CH relay moduleUsed in 14 projects
ON
In short

What is the Relay module 4-channel 5 V and what is it used for?

Four relays with optocouplers on one board. Makers use it for home automation with four loads.

How it works

Each input drives an optocoupler and a transistor that energises a relay coil, with a flyback diode.

Key specifications

Interface module specValue
Function4 × SPDT relays with driver
Supply voltage5 V, about 70 mA per active relay
Interface4 inputs (active LOW on most)
Rating10 A 250 V AC per contact (derate to 5 A)
Logic level5 V (most work from 3.3 V with VCC-JD jumper removed)

Pinout

VCC5 V for the inputs
GNDGround
IN1 to IN4Low turns a relay on (most boards)
JD-VCCRelay coil supply (jumper to VCC)
COM NO NCContacts for each relay

How to use it

Leave the jumper on for simple use. For real isolation, remove it and power JD-VCC from a separate 5 V supply. Treat the 10 A rating as 5 A in practice, and have mains wiring checked by a qualified electrician.

Applications

Alternatives

Buy at

Common questions

What is the Relay module 4-channel 5 V used for?

In maker projects: home automation with four loads.

How does the Relay module 4-channel 5 V work?

Each input drives an optocoupler and a transistor that energises a relay coil, with a flyback diode.

What voltage does the Relay module 4-channel 5 V need?

5 V, about 70 mA per active relay.

How do I connect the Relay module 4-channel 5 V to an Arduino or ESP32?

4 inputs (active LOW on most). Pins: VCC (5 V for the inputs), GND (Ground), IN1 to IN4 (Low turns a relay on (most boards)), JD-VCC (Relay coil supply (jumper to VCC)), COM NO NC (Contacts for each relay).

What can I use instead of the Relay module 4-channel 5 V?

Relay module 2-channel 5 V and Solid state relay module 2-channel (G3MB-202P).