Idea
In short
How do you build a grain dryer fan controller?
Fans run only when outside air is dry enough to dry grain, saving power. You need ESP32 DevKit V1, SHT31 temperature and humidity sensor × 2, Relay module 2-channel 5 V and 12 V DC fan 80 mm.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use humidity rules to run a fan.
Parts list
- Development Boards
- Sensors
- Interfaces
- Motors & Actuators
How to build it
- Read inside and outside humidity
- Run the fan only when outside is drier
- Stop when grain is dry
- Log hours
- Alert on a stuck fan
Common questions
What parts do I need for the grain dryer fan controller?
ESP32 DevKit V1, SHT31 temperature and humidity sensor × 2, Relay module 2-channel 5 V and 12 V DC fan 80 mm.
How long does the grain dryer fan controller take to build?
About 150 minutes for a intermediate maker.
