Idea
In short
How do you build an infrared hot-spot pointer?
A non-contact infrared sensor shows the surface temperature of whatever it points at, handy for warm electronics and a mug of tea. Learning only; not for body-temperature decisions. You need Arduino Nano, MLX90614 infrared thermometer, SSD1306 OLED Display, Active buzzer 5 V and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 180 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read surface temperature at a distance.
Parts list
- Development Boards
- Sensors
- Displays
- Motors & Actuators
- Prototyping
How to build it
- Wire the sensor on I2C
- Read object and ambient temperature
- Show both on the display
- Beep above a set value
- Compare with a thermometer
Common questions
What parts do I need for the infrared hot-spot pointer?
Arduino Nano, MLX90614 infrared thermometer, SSD1306 OLED Display, Active buzzer 5 V and Breadboard 830 Tie Points.
How long does the infrared hot-spot pointer take to build?
About 180 minutes for a beginner maker.
