Projects / Ideas / Bench supply from a 12 V SMPS

Bench supply from a 12 V SMPS

BeginnerHome LabIdeaReviewed
In short

How do you build a bench supply from a 12 V SMPS?

A metal 12 V SMPS with buck and boost modules, banana sockets and a meter becomes a safe bench supply. You need SMPS 12 V 5 A (metal case), XL4015 5 A buck converter module, USB power meter (voltage and current), Banana plug and socket 4 mm × 2, Rocker switch (KCD1, 2-pin), Fuse holder (panel, 5 × 20 mm), Fuse 1 A glass (5 × 20 mm) and ABS project box (100 × 60 × 25 mm).

Level
Beginner
Time
About 180 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a practical bench supply from modules.

How to build it

  1. Have a qualified electrician wire the mains inlet and SMPS in a closed, earthed case
  2. Feed the buck converter from 12 V
  3. Set voltage and current limit
  4. Add a meter and banana sockets
  5. Fuse the output

Related projects

Common questions

What parts do I need for the bench supply from a 12 V SMPS?

SMPS 12 V 5 A (metal case), XL4015 5 A buck converter module, USB power meter (voltage and current), Banana plug and socket 4 mm × 2, Rocker switch (KCD1, 2-pin), Fuse holder (panel, 5 × 20 mm), Fuse 1 A glass (5 × 20 mm) and ABS project box (100 × 60 × 25 mm).

How long does the bench supply from a 12 V SMPS take to build?

About 180 minutes for a beginner maker.