Components / Boards / ESP32-S3 DevKitC-1

ESP32-S3 DevKitC-1

ESP32-S3-based evaluation board with variant-dependent memory/configuration.

MicrocontrollerESP32-S3 (dual-core Xtensa LX7)
ClockUp to 240 MHz
Flash8 MB typical (N8); others to 16 MB
RAM512 KB SRAM, plus 2 or 8 MB PSRAM on R2/R8 versions
Development BoardsReviewedMPN ESP32-S3-DevKitC-1-N8R8Used in 14 projects
ESP32
In short

What is the ESP32-S3 DevKitC-1 and what is it used for?

ESP32-S3-based evaluation board with variant-dependent memory/configuration. Makers use it for review actual pinout and supply options.

In the real world

Embedded vision and connected prototypes

How it works

Development boards expose computing and I/O for prototyping. Exact board revision and power circuitry determine safe external connections.

Key specifications

Development board specValue
MicrocontrollerESP32-S3 (dual-core Xtensa LX7)
ClockUp to 240 MHz
Flash8 MB typical (N8); others to 16 MB
RAM512 KB SRAM, plus 2 or 8 MB PSRAM on R2/R8 versions
Logic level3.3 V
Input voltage5 V via either USB-C port
I/O pinsUp to 36 GPIO on headers
ADC12-bit, 20 channels
WirelessWi-Fi 2.4 GHz b/g/n, Bluetooth 5 LE
Current per I/O pinKeep under about 20 mA per pin

Pinout

USB (native)USB on GPIO19/20; can act as keyboard or mouse
UART portUSB-serial bridge for flashing and logs
GPIO48 or 38Onboard RGB LED (depends on board revision)
GPIO0BOOT button
3V3 / 5V / GNDPower

How to use it

Pick "ESP32S3 Dev Module" in Arduino. Enable "USB CDC On Boot" to see Serial on the native USB port. Pin numbers differ from the classic ESP32.

void setup() { Serial.begin(115200); }
void loop() { Serial.println("S3 alive"); delay(1000); }

Applications

Alternatives

Buy at

Common questions

What is the ESP32-S3 DevKitC-1 used for?

In products: embedded vision and connected prototypes. In maker projects: review actual pinout and supply options.

How does the ESP32-S3 DevKitC-1 work?

Development boards expose computing and I/O for prototyping. Exact board revision and power circuitry determine safe external connections.

What can I use instead of the ESP32-S3 DevKitC-1?

ESP32 DevKit V1.