Projects / Ideas / ESP32-S3 tilt marble game

ESP32-S3 tilt marble game

IntermediateGames & ToysIdeaReviewed
In short

How do you build an ESP32-S3 tilt marble game?

An ESP32-S3 reads an MPU6050 and rolls a marble around an OLED maze as you tilt the board, with walls it cannot cross and a goal. You need ESP32-S3 DevKitC-1, MPU6050 IMU, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 190 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Play a tilt maze on a small screen.

Parts list

How to build it

  1. Wire the sensor and display on I2C
  2. Read the tilt angles
  3. Move the marble by the tilt
  4. Check collisions with walls
  5. Show the goal and a timer

Related projects

Common questions

What parts do I need for the ESP32-S3 tilt marble game?

ESP32-S3 DevKitC-1, MPU6050 IMU, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the ESP32-S3 tilt marble game take to build?

About 190 minutes for a intermediate maker.